4.9
Groups [3]
4.9.1
Trunk Group—TRG Settings [3-1-1]
CO lines are grouped into CO line groups. The settings of the CO line groups determine the settings of their
CO lines. A maximum of 64 CO line groups can be programmed.
Main
Group Name
Specifies the name of the CO line group for programming reference. As for the available characters, refer to
the character code table described in section 3.2.1 Installing and Starting KX-TAW848 Maintenance
Console.
Default
Not stored.
Value Range
Max. 20 characters
Programming References
4.15.1 CO Line Setting [9-1]
Feature Guide References
2.2.2 Group
COS
Specifies the COS of the CO line group.
Default
1
Value Range
1–64
Programming References
4.8.14 Class of Service—COS Settings [2-7-1]
4.15.1 CO Line Setting [9-1]
Feature Guide References
2.2.2 Group
4.9 Groups [3]
Feature Guide
383