Portable Station [1-2] - Panasonic KX-TAW848 Features Manual

4.7 Configuration [1]
Feature Guide References
None
Delete
Assigns the card type to be deleted from the slot.
Default
Not applicable.
Value Range
Not applicable.
Programming References
4.7.1 Slot [1-1]
Feature Guide References
None
4.7.7

Portable Station [1-2]

Various portable station (PS) settings can be programmed. A maximum of 28 PS can be registered.
PS Registration and De-registration
A PS must be registered to the PBX by programming both the PBX and PS before it can be used.
Programming instructions of the PBX are given below; programming instructions of the PS are found in the
Installation Manual.
If desired, it is possible to de-register the PS later on.
Registration
Follow the steps below to register the PS.
1.
Specify the extension number of the PS, and then click Apply.
2.
Select the PS by clicking the Select cell and set it to ON.
More than one PS can be selected at a time (only the unregistered PS with an extension number
can be selected).
3.
Click Registration.
A dialog box will appear when the registration starts to execute.
4.
While the registration is executing, program the PS referring to "2.7.7 Connecting a Cell Station to
the PBX" of the Installation Manual.
5.
Click Confirm.
• If the registration is still in the process, the dialog box will show "Waiting: PS Registration".
Click Close.
• If the registration is successful, the dialog box will show "Registration Succeed".
If there are more PSs to be registered, click Continue to resume or Quit to terminate the
registration. If not, click Close.
284 Feature Guide