Panasonic KX-TAW848 Features Manual page 549

Tenant Number
Specifies the tenant number to determine the Time Table by which calls are distributed depending on the
time of the day.
Default
1
Value Range
1–8
Programming References
None
Feature Guide References
1.1.1.2 Direct In Line (DIL)
VM Trunk Group No.
Specifies the number of the VPS trunk (CO line) group sent to the VPS when the DIL destination is the
floating extension number of a VM (DPT) Group.
The VPS trunk (CO line) group number is used to send the applicable company greeting message of the
VPS to the caller.
Default
1
Value Range
1–48
Programming References
None
Feature Guide References
1.1.1.2 Direct In Line (DIL)
1.19.2 Voice Mail DPT (Digital) Integration
CLI for DIL
When CLI distribution is enabled for a CO line to which the DIL distribution is set, incoming CO line calls will
be distributed to the CLI destinations (instead of the DIL destinations) if the caller's identification number is
found in the System Speed Dialing Table, which is used as the Caller ID Table.
CLI distribution can be enabled or disabled for each time mode (day/lunch/break/night) on a CO line basis.
Slot
Indicates the slot position of each CO line card (reference only).
Default
Current slot number
4.15 CO & Incoming Call [9]
Feature Guide 549