Panasonic KX-TAW848 Features Manual page 156

1.21 Administrative Information Features
Number in the
Pattern
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
156 Feature Guide
Data
Date Shows the date of the call.
Time Shows the end time of a call as hour/minute/AM or PM.
Ext (Extension) Shows the extension number, floating extension number, etc.,
which was engaged in the call.
Also shows the following codes:
Dxxx: Outgoing CO line call from a doorphone
(xxx=doorphone number) (→ 1.15.1 Doorphone Call)
*xxx: Verified call (xxx=verified code) (→ 1.8.5 Verified Code
Entry)
CO Shows the CO line number used for the call.
Dial Number [CO Line Call]
Outgoing CO Line Call
Shows the dialed telephone number.
Digits shown are as follows:
0 through 9,
P: Pause
F: External Feature Access (EFA) signal
=: Host PBX Access code (→ 1.5.4.6 Host PBX Access Code
(Access Code to the Telephone Company from a Host PBX))
. (dot): Secret dialing
–: Transferred call
If the transfer destination extension enters additional digits,
those digits will be added after "–".
Incoming CO Line Call
Shows <I> + the caller's identification name/number.
[Outgoing Intercom Call]
Shows the dialed extension number followed by "EXT".
[Log-in/Log-out]
Shows the Log-in or Log-out status.
[Timed Reminder]
Shows the status of a timed reminder, either "Start", "No
Answer", or "Answer". (→ 1.23.4 Timed Reminder)
[Printing Message]
Shows the selected message. (→ 1.21.2 Printing Message)
[Sensor Call]
Shows calls from an external sensor as follows:
<I> S + sensor number. (→ 1.15.8 External Sensor)
Ring Shows the ring duration before the call was answered in
minutes/seconds.
Duration Shows the duration of the CO line call in hours/minutes/
seconds.
Acc Code Shows the account code appended to the call. (→ 1.5.4.3
(Account Code) Account Code Entry)
Description
, #