Time Service-Week Table [2-5-1] - Panasonic KX-TAW848 Features Manual

4.8 System [2]
Visual Caller ID Display Timer
Specifies the length of time the Caller ID number, with the Call Waiting tone offered by an analog line from
the telephone company, is shown on the display. The Caller ID number flashes on the display twice for five
seconds at 15-second intervals.
Default
30 s
Value Range
0–250 s
Programming References
None
Feature Guide References
1.1.3.3 Call Waiting
External Sensor Ringing Continuous Timer
Specifies the length of time that the PBX waits for the called party to answer before canceling a sensor call.
Default
30 s
Value Range
10 × n (n=1–15) s
Programming References
None
Feature Guide References
1.15.8 External Sensor
4.8.8 Time Service—Week Table [2-5-1]
A specific time mode (day, night, lunch, or break) can be selected for operation depending on the time of
the day. The time mode can be switched either automatically or manually. Select the desired switching mode
from the Time Service Switching Mode list.
The number of a Time Table corresponds to the number of a tenant. Select the desired Time Table from the
Time Table No. list.
When in the Automatic Switching mode, time modes of the tenant are switched as programmed in the
corresponding Time Table. Manual switching is possible only from an authorized extension (determined by
COS).
Day / Lunch / Night
Time Tables containing day, lunch, and night start times can be programmed for each day of the week.
Feature Guide 317