Panasonic KX-TAW848 Features Manual page 157

Number in the
Pattern
(9) CD (Condition
Code)
(10) Cost
The following data can be controlled through system programming to adjust whether (or how) they are
printed or displayed by SMDR.
[Programmable Items]
Item
Outgoing CO line call
Incoming CO line call
Outgoing intercom call
Log-in/Log-out status
ARS dial
Caller's identification
Secret dialing
Date order
Received call
Answered call
Data
Shows other call information using the following codes:
TR: Transfer
FW: Call Forwarding (FWD) to CO line
D0: Call using Direct Inward System Access (DISA)
RM: Remote maintenance (modem) (→ 2.3.1 PC
Programming)
NA: Not answered call
RC: Received call
AN: Answered call
VR: Received call with Call Waiting Caller ID (Visual Caller ID)
VA: Answered call with Call Waiting Caller ID (Visual Caller ID)
Shows the call charge. This is not available if your telephone
company does not provide a call charge reporting service.
Controls whether outgoing CO line calls are shown. This setting is
common throughout the PBX (→ SMDR Outgoing Call Printing [804]).
Class of Service (COS) programming is also required.
Controls whether incoming CO line calls are shown (→ SMDR Incoming
Call Printing [805]).
Controls whether outgoing intercom calls are logged.
Controls whether the Log-in/Log-out status of extensions is logged.
Controls whether the user-dialed number or the ARS-modified number
is shown.
A Host PBX Access code ("=" followed by the access code) can be
shown (as supplementary information) only when the modified number
is selected in this setting. (→ 1.9.1 Automatic Route Selection (ARS))
Controls whether a caller's telephone number, name, number and name,
or nothing is shown. If "none" is selected, <I> will not be shown.
Controls the display of secret dialing, when ARS dial, above, is set to
show ARS-modified numbers. If enabled, numbers dialed secretly will be
shown as dots.
If ARS dial is set to show user-dialed numbers, secretly dialed numbers
are always shown as dots in SMDR, regardless of this setting.
Controls the date format. (MM-DD-YY, DD-MM-YY, YY-MM-DD, or YY-
DD-MM)
Controls whether the time of receiving an incoming CO line call is shown.
Controls whether the time of answering an incoming CO line call is
shown.
1.21 Administrative Information Features
Description
Description
Feature Guide 157