Panasonic KX-TAW848 Features Manual page 179

Light Pattern
Off
Red on
Green on
Slow green flashing
Slow red flashing
Note
Pressing a Time Service button will change the current time mode only if the COS assigned to the
extension is authorized to do so (→ Time Service Manual Switching [514]) or if the extension is
assigned as a manager. All other extension users can press this button on their proprietary
telephones (PTs) to display the current time mode.
Conditions
• The start times of the following time modes can be specified through PC programming as well as PT
programming (→ Time Service Starting Time [102]).
– Day 1 and 2
– Lunch
– Night
The start and end times of the following break modes can be specified through PC programming only.
– Break 1
– Break 2
– Break 3
Note that if an end time is programmed for a break, the day mode will start or resume at this time, as
shown previously in "Visualization of Time Schedule for Tenant 1" example. If no end time is
programmed, the break will continue until the start of the next time mode, as shown in Time Table 4 in
"Visualization of Time Schedule for Other Tenants".
• Time Service Switching Mode (Automatic/Manual) Button
Any flexible button can be customized as the Time Service Switching Mode (Automatic/Manual) button.
Feature Guide References
1.8.1 Toll Restriction (TRS)
1.18.2 Flexible Buttons
2.2.3 Tenant Service
User Manual References
1.7.7 Time Service
2.1.2 Time Service Mode Control
Current Time Mode
Day
Night
Lunch
Break
Holiday
2.2 System Configuration—Software
Feature Guide 179