Panasonic KX-TAW848 Features Manual page 265

A • Perform the following steps:
1.
On the Groups—Incoming Call Distribution Group—Group Settings screen
(see "4.9.6 Incoming Call Distribution Group—Group Settings [3-5-1]"), enter the
floating extension number you chose for the ICD group in the Floating Extension
Number cell.
2.
Click Apply.
3.
On the Groups—Incoming Call Distribution Group—Member screen (see "4.9.7
Incoming Call Distribution Group—Member [3-5-2]"), select the ICD group you
created from the Incoming Call Distribution drop-down list.
4.
Enter the extension numbers of member extensions in the Extension No. column.
5.
Click Apply.
6.
On the DIL tab of the CO & Incoming Call—DIL Table & Port Setting screen (see
"4.15.2 DIL Table & Port Setting [9-2]"), enter the floating extension number of the
ICD group as the DIL Destination of each time mode.
7.
Modify other settings as required from the Group—Incoming Call Distribution
Group submenu.
Q How do I set the queuing operation for an Incoming Call Distribution group?
A • Perform the following steps:
1.
On the Groups—Incoming Call Distribution Group—Queuing Time Table
screen (see "4.9.8 Incoming Call Distribution Group—Queuing Time Table [3-5-3]"),
set the actions as required for each queuing table.
2.
On the Groups—Incoming Call Distribution Group—Group Settings screen
(see "4.9.6 Incoming Call Distribution Group—Group Settings [3-5-1]"), from the
Queuing Time Table tab, select the number of the Queuing Time Table to use in
each time mode.
Q How do I add an extension as a member of an Incoming Call Distribution (ICD)
group?
A • Perform the following steps:
1.
On the Groups—Incoming Call Distribution Group—Member screen (see "4.9.7
Incoming Call Distribution Group—Member [3-5-2]"), from the Incoming Call
Distribution drop-down list, select the group you want to modify.
The ICD group must have an extension number set.
2.
Enter the extension number of the extension you want to add in a blank cell of the
Extension No. column.
3.
Set Delayed Ring and Wrap-up Time as necessary.
4.
Click Apply.
Note that it is necessary to set the extension number of the ICD group in advance.
Q I cannot set system speed dialing numbers from PC Console.
A • Set the COS of the extension to which PC Console is connected to Manager class, by
setting Manager on the Options tab of the System—Class of Service—COS Settings
screen (see "4.8.14 Class of Service—COS Settings [2-7-1]") to "Enable".
• System speed dialing numbers can only be edited by one PC Console at a time.
4.6 Help
Feature Guide 265