Call Park - Panasonic KX-TAW848 Features Manual

Mode 1
Mode 2
(Default)
Mode 3
Mode 4
If one of the following occurs frequently with an SLT, choose "Mode 2", "Mode 3", or "Mode 4":
a)
When an SLT user answers a call, a reorder tone is heard or no one is heard on the other end.
b)
When an SLT user goes off-hook, a reorder tone is heard instead of a dial tone.
If a call is not terminated after going on-hook, the above cases occur. To avoid these problems, choose
"Mode 2", "Mode 3", or "Mode 4". Every call will be terminated unless the Hold feature number is
entered after flashing the hookswitch in Mode 2, Mode 3, and Mode 4.
• Hold Alarm tone pattern has a default (→ 5.2.1 Tones/Ring Tones).
User Manual References
1.4.2 Call Hold

1.12.2 Call Park

Description
An extension user can place a call into a common parking zone of the PBX. The Call Park feature can be
used as a transferring feature; this releases the user from the parked call to perform other operations. A
parked call can be retrieved by any extension user.
Conditions
• Automatic Call Park
It is possible to select an idle parking zone automatically.
Hold
Flashing the hookswitch
+
Going on-hook
Flashing the hookswitch
+
Hold Feature No.
+
Going on-hook
Flashing the hookswitch
+
Hold Feature No.
+
Going on-hook
Flashing the hookswitch
+
Hold Feature No.
+
Going on-hook
Transfer to CO Line
Flashing the hookswitch
+
CO Line Access No.
Flashing the hookswitch
+
CO Line Access No.
Flashing the hookswitch
+
Hold Feature No.
+
CO Line Access No.
Flashing the hookswitch
+
Hold Feature No.
+
CO Line Access No.
1.12 Holding Features
Transfer to Extension
Flashing the hookswitch
+
Extension No.
Flashing the hookswitch
+
Extension No.
Flashing the hookswitch
+
Extension No.
Flashing the hookswitch
+
Hold Feature No.
+
Extension No.
Feature Guide 93