Vm(Dtmf) Group-System Setting [3-8-1] - Panasonic KX-TAW848 Features Manual

Programming References
4.7.11 Extension Port [1-5]
Feature Guide References
1.19.1 Voice Mail (VM) Group
4.9.12 VM(DTMF) Group—System Setting [3-8-1]
A Panasonic Voice Processing System (VPS) with DTMF Integration can be connected to SLT ports of the
PBX. The SLT ports that are connected to the VPS are called a VM (DTMF) Group. A maximum of 2 VM
(DTMF) Groups can be programmed.
VM DTMF Status Signal—Ringback Tone
Specifies the DTMF status signal the PBX sends to the VPS when the called extension is ringing.
Default
1
Value Range
Max. 4 digits (consisting of 0–9, *, and #)
Programming References
None
Feature Guide References
1.19.1 Voice Mail (VM) Group
1.19.3 Voice Mail DTMF Integration
VM DTMF Status Signal—Busy Tone
Specifies the DTMF status signal the PBX sends to the VPS when the called extension is busy.
Default
2
Value Range
Max. 4 digits (consisting of 0–9, *, and #)
Programming References
None
Feature Guide References
1.19.1 Voice Mail (VM) Group
1.19.3 Voice Mail DTMF Integration
4.9 Groups [3]
Feature Guide 413