Certifications - Iqinvision IQeye User Manual

FCC compliance and advisory
This equipment has been tested and found to comply with the limits for a Class B digital device
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses, and can
radiate radio frequency energy, and if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Any changes or modifications not expressly approved by the manufacturer void the user's
authority to operate the equipment.
Please note: The use of non-shielded interference cable with this equipment is prohibited.
Canadian DOC statement
This digital apparatus does not exceed the Class B limits for radio noise emissions from a digital
apparatus set out in the Radio Interference Regulations of the Canadian Department of
Communications.
Le présent appareil numérique n'émet pas de bruits radioélectriques dépassant les limites
applicables aux appareils numériques de la classe B prescrites dans le Règlement sur le brouillage
radioéletrique édicté par le ministère des Communications du Canada.
UL
This product is intended to be supplied by a Listed Power Source marked "Class 2," "Limited
Power Source," or "LPS" and rated 12-33 V DC or 12 - 24 V AC, minimum 300 mA.

Certifications

91