Iqinvision IQeye User Manual page 56

password
filepath
Review the IQeye Reference Manual for a complete description of all
Note:
dynamic print variables.
file name
If your camera is configured to capture images at intervals of less than
Note:
one second, you will get numerous images with the same time stamp.
Enter the password that the camera will issue to the FTP server
during its login attempt.
Specify the path and appropriate folder into which the camera will
save the trigger event images.
The $SN/$SD variables above are the dynamic print variables for the
camera's name and the current date. When you issue these variables
within the FILEPATH field, the camera will create a new directory
named after the camera. Within that directory, the camera will create
a new directory daily with that date as the directory's title. It will save
all subsequent trigger images from that date in the same directory.
Specify the desired filename for the trigger event images.
The $ST/$FN variables above are the dynamic print variables for the
camera's name and the current date, which the camera uses when
saving image sequences on an external server. When you specify the
filename with the $FN variable, the camera will name the images
according to their base file name (trig.jpg) and their location in the
trigger sequence. Additional characters in the filename will be added
to the base file name. For example, the filename above will save the
images as time.trig#.jpg in which time is the exact time (in
hour.minutes.seconds format) that the images were taken.
The following images will result from a trigger event with the
filename above:
•10.30.14.trig-3.jpg (Pre-trigger image)
•10.30.15.trig-2.jpg (Pre-trigger image)
•10.30.15.trig-1.jpg (Pre-trigger image)
•10.30.16.trig+0.jpg (Image taken at time of sensor activation)
•10.30.16.trig+1.jpg (Post-trigger image)
•10.30.17.trig+2.jpg (Post-trigger image)
•10.30.17.trig+3.jpg (Post-trigger image)
trigger event configuration
56