Server Settings - Iqinvision IQeye User Manual

2.4.4 Server Settings

The final step on the installation wizard contains the most important of the server settings. If
necessary, consult your network administrator or your ISP for the appropriate information.
Use the text input fields and pull-down menus on this page to adjust the camera's necessary
server settings. All settings will be activated once you choose the appropriate setting.
IQeye Name
TCP/IP Gateway
Time Zone
Enter a descriptive name for your camera, up to 16 characters long.
The name can include numbers and letters. Use the underscore
character (_) instead of any spaces.
Enter the IP address of the router to be used as a TCP/IP gateway
between networks. Traffic destined for another network will be
routed to the gateway and then forwarded to their destination.
If you only need to communicate with your camera over a local
network, no gateway setting is required. However, if you plan to
access your camera on the Internet, you must enter the appropriate
TCP/IP gateway.
Choose the appropriate time zone setting from the settings contained
in the pull-down menu.
installation & initial configuration
25