Iqinvision IQeye User Manual page 16

Click the OK button.
5
You have two options for assigning an IP address to your camera:
IP via will configure the camera to use one or more standard network protocols
❍
for automatic IP address assignment.
Assign IP allows you to assign a fixed IP address to the camera. This is the most
❍
commonly-used option.
You will need to verify that the correct Subnet Mask is used - VisiCon will assign
one by default, and it is correct for most situations. Consult your system
administrator for assistance.
For Gateway, enter a value only if you know the correct gateway. Otherwise
leave the automatic checkbox checked.
Click the OK button.
6
If you selected the IP via option, the camera will automatically reboot to enable the
new selections.
installation & initial configuration
16