Iqinvision IQeye User Manual page 89

Provide the Privileged Username and Password. Defaults are used in the example
5
below. When you type the password, it will not appear in your terminal window.
If you have changed your privileged password, enter the new password.
Note:
Issue a PUT command to place the firmware file on the camera's Flash disk:
6
The file name with which you FTP the firmware onto the camera must
Note:
match the name specified in the SET/DEFINE SERVER SOFTWARE
command. This input is case-sensitive. Refer to the IQeye Reference
Manual for details on using the SET/DEFINE SERVER SOFTWARE
command
The camera will place the firmware file on the Flash disk and will reboot the
camera. Do not stop the FTP session or reset the camera during the reboot.
If the reboot was interrupted, you must reload the camera's BOOT code
Note:
via TFTP.
Exit the FTP session.
7
software updates
89