View Still Images - Iqinvision IQeye User Manual

zoom buttons
size buttons
At smaller sizes, image overlays will be truncated, and may overlap. The
Note:
size of the overlays doesn't change, but there is less image area available
for displaying them.

2.5.2 View Still Images

To view still images, click the stop button that appears at the top of the View Images page:
Once you click the stop button, the camera will take an image and then display it in a new
browser page. Since the browser is requesting a new still image from the camera, the new image
will most likely differ from the last streaming image.
Click the zoom buttons to zoom in (+) or out (-).
You can zoom in to an area that is two pixels wide. You can zoom
out to the full imager viewing area (which depends upon your camera
model and lens). When you reach maximum zoom in either direction,
you will see an alert message.
Click the size buttons to make the viewing window smaller (-) or
larger (+).
The maximum viewing window size is the same as your camera's
imager size (which differs by camera model). You can also
downsample to progressively smaller images that are 1/2, 1/4, 1/8,
and 1/16 of the maximum size. When you reach the maximum or
minimum size, you will see an alert message.
installation & initial configuration
28