Access Hours - Iqinvision IQeye User Manual

For Netscape 4.7
1
2
3
4

5.3 Access Hours

IQeye cameras feature an access hours setting that lets you control the operating hours for the
camera. Although the browser-based interface does not support setting hours for individual
days, you can configure the operating hours separately for weekdays versus weekends. For both
weekdays and weekends, you can either configure the hours to provide unlimited, 24-hour
access or close the camera completely.
To provide flexibility for the operating hours, you can also set specific times during which the
camera will be available to outside users. At times that are outside of the specified hours of
operation, the camera will serve a black image containing a customizable message to any non-
privileged users. Privileged users can still see the streaming images at any time.
You can adjust the access hours separately for Monday through Friday, and for Saturday and
Sunday. Use the Access pull-down menu to choose On for unlimited access, Off for permanently
closed, or Timer for hours-based operation.
Use the access denied message field to personalize the message that appears during off-hours.
To set the operating hours for timer-based access control:
1
2
Note:
3
Select Edit from the Menu bar selections.
Choose Preferences from within the Edit options.
Select Advances from the list of Preferences options.
Click the radio button next to either "Select all cookies" or "Select only cookies
that get sent back to originating server."
Select Timer from the pull-down menus for either Weekdays, Weekends, or both.
Enter the time that the camera should open in the Timer Start field. Enter the time
in 24-hour time, using the hours:minutes format (HH:MM). For example: 14:30
equals 2:30 PM.
You cannot set the camera to operate according to multiple hours cycles.
Set the time that the camera will close by entering a time into the Timer Stop field.
Enter the time in hours:minutes format (HH:MM).
access control
48