Iqinvision IQeye User Manual page 15

Click the assign an IP address button. A dialog box will appear:
3
Specify which camera to assign the IP address to using one of the following methods:
4
Enter the camera's hardware address, which appears on the label affixed to the
❍
back of the camera.
Push the Browse button. VisiCon will search your network for cameras.
❍
In the example, VisiCon shows the hardware address and default camera name
for each camera it finds, but the IP address for the highlighted camera is all
zeroes (the factory default).
The Browse feature in VisiCon version V1.4/1 and later will not be able
Note:
to find cameras running operating code older than V1.5/2. To check your
camera's operating code, see Server Configuration on page 40.
installation & initial configuration
15