Focus - Iqinvision IQeye User Manual

To adjust the settings in the wizard:
Choose the setting you want to adjust.
1
Select the appropriate value from the pull-down menu, or enter the appropriate
2
value into the form field and press <Tab>.
Repeat this process for any other settings you want to adjust.
3

2.4.1 Focus

If your camera is out of focus, you can use the rapidly updating image on the first page of the
wizard to bring your camera into focus. The image that appears on the page is a reduced image
from the center of your camera's field of view.
The image on the Focus page displays a number that corresponds to the level of focus. Maximize
this number to properly focus the camera. As you approach the proper focus point, either by
bringing the image into focus or by maximizing the focus number, slight adjustments will bring
the camera into focus.
To focus your IQeye1 or IQeye2 camera, gently rotate the lens while you watch the updating
image. For Micro-mount lenses, turn the entire lens. For C-mount and CS-mount lenses, the lens
usually contains a built in focus-ring on the outer edge of the lens. For IQeye3 cameras, gently
rotate the focus knob while you watch the updating image.
When you are satisfied with your camera's level of focus, click the Next>> link that appears near
the bottom of the page.
installation & initial configuration
20