Iqinvision IQeye User Manual page 79

Table B-4:
Problem
There is static in my
images.
My images are too
red/green/blue.
My images are blurry. Focus the camera. Refer to the
Once I connected a
trigger to my camera,
the camera no longer
functions properly.
Operational Troubleshooting (Continued)
Suggestion
Increase the amount of light in your camera's
environment. Static most often appears in dark scenes.
Check for electromagnetic interference. Excess
interference can lead to poor image acquisition and/or
processing as well as visible static.
Check your image resolution and compression settings.
Low-resolution, high-compression imaging may result in
pixellation or "noise".
Adjust the default lighting settings. Set the value to match
the light source that illuminates your camera's
surroundings. If this value is set improperly, the colors in
your image may appear out of balance.
Try changing the Image Settings, especially the auto color
correction command SET/DEFINE IMAGE LIGHTING
AUTO ENABLED. (see the
of the IQeye Reference Manual)
for information.
Fast-moving subjects may appear blurred as a result of
imaging hardware limitations.
Check to make sure that your sensor device is not taking
more than 50 mA of current from the Relay Power Out
pin of the screw terminal. If so, choose a new trigger
device.
Image Configuration chapter
Focus section on page 38
troubleshooting
79