D.5 IQeye3 Lens Selection Utility
The IQeye3 includes a lens selection device that moves the imaging chip toward or away from
the lens as needed to achieve proper focus. As you rotate the focus wheel, the pointer moves,
along with the entire imager assembly.
You can achieve near-perfect focus by moving the pointer to the line that corresponds with the
type of lens being used. Some fine-tuning may be needed. For C-mount lenses, ensure that the
pointer is closer to the line marked C before attempting to fine-tune the focus. For CS-mount
lenses, ensure that the pointer is closer to CS before attempting to fine-tune the focus.
Note:
For micro-mount lenses, move the pointer to CS and use the IQinVision
micro-mount adapter.
focus wheel
•
pointer
pinouts
86