Iqinvision IQeye501 Declaration Of Conformity

Manufacturer's Name:
Manufacturer's Address:
The manufacturer hereby declares that the product(s):
Product Name:
Model Number(s):
Conforms to the following standards or other normative documents:
Electromagnetic Compatibility:
Emissions:
Immunity:
Harmonics:
Flicker:
Safety:
EN 60950-1:2001 with A11:2004
IEC 60950-1:2001
Supplementary Information:
Manufacturer's Contact:
Declarations:
I here by certify that the above products comply with European Standards for EMC (per Directive 89/336/EEC, as amended by
92/31/EEC, 93/68/EEC) and Safety (per Directive 73/23/EEC, as amended by 93/68/EEC).
These results are deemed satisfactory evidence of compliance with ICES-003 of the Canadian Interference-Causing Equipment
Regulations.
This declaration is issued under the sole responsibility of the manufacturer.
(signature on file at IQinVision)
Peter DeAngelis
President & CEO
IQinVision Inc.
Date: February 24, 2007
San Juan Capistrano, CA

Declaration of Conformity

IQinVision Inc.
33122 Valle Road
San Juan Capistrano, CA 92675
USA
IQeye 500 Series Cameras
IQeye501, IQeye510, IQeye511
EN 55022:1998 with A1:2000, A2:2003; Class A
CISPR 22:1997 with A1:2000, A2:2002; Class A
AS/NZS CISPR 22:2002; Class A
EN 55024:1998 with A1:2001, A2:2003 (*)
CISPR 24:1997 with A1:2001, A2:2002 (*)
EN 61000-3-2:2000 with A2:2005
IEC 61000-3-2:2000 with A1:2001, A2:2004
EN 61000-3-3:1995 with A1:2001
IEC 61000-3-3:1994 with A1:2001
(*) Performance Criteria B or better on ESD
(*) Outside installation tested with conduit
Director of Quality Assurance
IQinVision
33122 Valle Road
San Juan Capistrano, CA 92675
USA