Sample Network To Network Vpn Tunnel Configuration Worksheet - NETGEAR FVM318 Reference Manual

Reference Manual for the Model FVM318 Cable/DSL ProSafe Wireless VPN Security Firewall
• At least one side must have a fixed IP address.
If one side has a dynamic IP address, the side with a dynamic IP address must always be the
initiator of the connection.
• Will you use the typical automated Internet Key Exchange (IKE) setup, or a Manual Keying
setup in which you must specify each phase of the connection?
IKE is an automated method for establishing a shared security policy and authenticated keys.
• What level of encryption will you use, 56 bit DES or 168 bit 3DES? 3DES is more secure but
the throughput will be slower.

Sample Network to Network VPN Tunnel Configuration Worksheet

The sample configuration worksheet below is filled in with the parameters used in the procedure
examples below. A blank worksheet is provided below at
Configuration Worksheet" on page
Table 4-1. Sample Network to Network IKE VPN Tunnel Configuration Worksheet
IKE Tunnel Security Association Settings
Connection Name:
PreShared Key
Secure Association -- Main Mode or Aggressive Mode:
Perfect Forward Secrecy:
Encryption Protocol -- Null,
Key Life in seconds:
IKE Life Time in seconds:
FVM318 firewall
Network IP Settings
Network
LAN A
LAN B
Virtual Private Networking
4-26.
:
56 bit DES, or 168 bit 3DES:
Local IPSec
Identifier Network Address
LAN_A 192.168.3.1
LAN_B 192.168.0.1
"Network to Network IKE VPN Tunnel
LAN IP
Subnet Mask
255.255.255.0
255.255.255.0
VPNAB
r>T(h4&3@#kB
Main
Enabled
DES
(1 hour)
3600
(8 hours)
28800
Gateway IP
(WAN IP Address)
24.0.0.1
10.0.0.1
4-3