Showcodlicense - Fujitsu SPARC Enterprise M3000 Xscf Reference Manual

NAME showcodlicense - display the current Capacity on Demand (COD) right-to-use
(RTU) licenses stored in the COD license database
SYNOPSIS showcodlicense [-r] [-v]
showcodlicense -h
DESCRIPTION showcodlicense(8) displays COD license information stored in the COD license
database.
The showcodlicense(8) command is not available on the M3000 server.
When used without options it displays the current licenses.
You must have platadm or platop privileges to run this command.
Privileges
Refer to setprivileges(8) for more information.
OPTIONS The following options are supported:
-h
-r
-v
EXTENDED The showcodlicense command displays the following COD information:
DESCRIPTION
Description
Ver
Expiration
Count
Status
EXAMPLES
EXAMPLE 1
Displays usage statement.
When used with other options or operands, an error occurs.
Displays the license information in the raw license-signature
format, as stored in the COD license database.
Specifies verbose output. Displays both the formatted license
information and raw license-signature data.
Type of resource (processor).
Version number of the license, which is always set to 01.
Expiration of the license.
Number of right-to-use licenses granted for the given
resource.
GOOD, which indicates that the given resource is valid, or
EXPIRED, which indicates that the resource license is no
longer valid.
Displaying Verbose License Data
XSCF> showcodlicense -v
Description Ver Expiration Count Status
System Administration

showcodlicense(8)

347