Showdcl - Fujitsu SPARC Enterprise M3000 Xscf Reference Manual

showdcl(8)

NAME showdcl - display the current domain component list (DCL)
SYNOPSIS showdcl [-v] -a
showdcl [-v] -d domain_id [-l lsb [-l lsb]]...
showdcl -h
DESCRIPTION The showdcl(8) command displays the DCL that has been set by the setdcl(8)
command.
The DCL is hardware resource information that can be set for a domain or the
logical system boards (LSBs) that are components of a domain.
An LSB is a board unit recognized by the Oracle Solaris OS in a domain. Up to 16
LSBs can be registered for each domain, and they are represented by integer
numbers ranging from 0 to 15.
An XSB is a board unit that can be used in the system and is one division of a
divided physical system board (PSB). An XSB is represented by x–y, a combination
of a PSB number and the number of one division of the divided PSB (x is an integer
ranging from 00 to 15, and y is an integer ranging from 0 to 3).
The showdcl(8) command can display the following information that is part of a
DCL:
Domain ID
DID
System Administration 363