Setnameserver - Fujitsu SPARC Enterprise M3000 Xscf Reference Manual

NAME setnameserver - set the domain name system (DNS) servers and the DNS search
paths used in the XSCF network
SYNOPSIS setnameserver [-c add] address...
setnameserver -c del address...
setnameserver -c del -a
setnameserver -c addsearch domainname...
setnameserver -c delsearch domainname...
setnameserver -c delsearch -a
setnameserver -h
DESCRIPTION The setnameserver(8) command specifies the DNS servers and DNS search paths
used in the XSCF network.
Up to three DNS servers can be registered for XSCF. Up to five DNS search paths
can be registered.
You must have platadm privileges to run this command.
Privileges
Refer to setprivileges(8) for more information.
OPTIONS The following options are supported:
-a
-c add
-c addsearch
Deletes all the DNS servers and the DNS search paths that are
currently registered. When deleting all DNS servers, this option
is used together with "-c del." When deleting all DNS search
paths, this option is used together with "-c delsearch."
Adds the host with the specified IP address as a DNS server.
This option is used together with address. If the -c option is
omitted, "-c add" is assumed specified. When a DNS server is
registered, the existing setting is deleted and the specified
address is added.
Registers the specified domain name to the DNS search path.
This option is used together with domainname. If the -c option is
omitted, "-c add" is assumed specified. When a DNS search
path is registered, the existing setting is deleted and the
specified domain name is added.

setnameserver(8)

System Administration 239