Showhttps - Fujitsu SPARC Enterprise M3000 Xscf Reference Manual

NAME showhttps - display the status of the HTTPS service set for the XSCF network
SYNOPSIS

showhttps

showhttps -h
DESCRIPTION The showhttps(8) command displays the status of the HTTPS service currently set
for the XSCF network.
With this command, whether the HTTPS service is operating and the installation
status of the information that is necessary for authentication can be checked. If it is
installed, the installation date is also displayed.
The following states are displayed:
HTTPS Status
Server key
CA key
CA cert
CSR
You must have one of the following privileges to run this command:
Privileges
useradm, platadm, platop, auditadm, auditop, domainadm, domainmgr,
domainop, fieldeng
Refer to setprivileges(8) for more information.
The following option is supported:
OPTIONS
-h
EXTENDED The sethttps(8) command make settings for the HTTPS service in the XSCF
DESCRIPTION network.
EXAMPLES
EXAMPLE 1
Indicates whether the HTTPS service is operating
Indicates whether the private key of the web server has been
installed
Indicates whether the private key of the certification authority
has been installed
Indicates whether the certificate of the certification authority has
been installed
Requests the certificate of the web server
Displays usage statement.
Displays the status of the HTTPS service.
XSCF> showhttps
HTTPS status: enabled
Server key: installed in Apr 24 12:34:56 JST 2006
CA key: installed in Apr 24 12:00:34 JST 200
CA cert: installed in Apr 24 12:00:34 JST 200
CSR:
showhttps(8)
System Administration 411