Fujitsu SPARC Enterprise M3000 Xscf Reference Manual page 139

XSCF>
EXAMPLE 4
XSCF> poweron -q -y -d 1
EXIT STATUS The following exit values are returned:
0
>0
SEE ALSO poweroff(8), reset(8), showdomainstatus(8)
This command only issues the instruction to power-on.
The result of the instruction can be checked by the "showlogs power".
Turns on power to domains with domain IDs 1. Automatically replies with
"y" without displaying the prompt.
Successful completion.
An error occurred.
poweron(8)
System Administration 125