Showresult - Fujitsu SPARC Enterprise M3000 Xscf Reference Manual

NAME showresult - display the exit status of the most recently executed command
SYNOPSIS

showresult

showresult -h
DESCRIPTION The showresult(8) command displays the exit status of the most recently executed
command.
showresult(8) is convenient for a remote control program to confirm whether the
most recently executed command is successfully completed.
No privileges are required to run this command.
Privileges
Refer to setprivileges(8) for more information.
OPTIONS The following options are supported:
-h
EXTENDED If you stop a running command by an operation such as Ctrl-C and then execute
the showresult(8) command, the exit status that is displayed, zero or non-zero,
DESCRIPTION
depends on the cmmand that was stopped.
EXAMPLES
EXAMPLE 1
EXIT STATUS The following exit values are returned:
0
>0
Displays usage statement.
display the exit status of setupfru(8).
XSCF> setupfru -x 1 sb 0
XSCF> showresult
0
Successful completion.
An error occurred.
showresult(8)
System Administration 463