Fujitsu SPARC Enterprise M3000 Xscf Reference Manual page 21

setsnmp
setsnmpusm
setsnmpvacm
setssh
setsunmc
settelnet
settimezone
setupfru
setupplatform
showad
showaltitude
showarchiving
showaudit
showautologout
showboards
showcod
showcodactivation
showcodactivationhistory
manage the SNMP agent
specify the SNMPv3 agent's User-based
Security Model (USM) configuration
modify the SNMPv3 agent's View-based
Access Control Model (VACM)
configuration
configure the settings for the Secure Shell
(SSH) service used in the XSCF network
start or stop the Sun Management Center
agent and make changes to its
configuration
start or stop the Telnet service used in
the XSCF network
set the time zone and Daylight Saving
Time of XSCF
set up device hardware
set up platform specific settings
show Active Directory configuration and
messages
display the altitude of the system and
whether the air filter installed
display log archiving configuration and
status
display the current auditing system state
display the session timeout time of the
XSCF shell
display information on an eXtended
System Board (XSB)
display Capacity on Demand (COD)
information
display the current Capacity on Demand
(COD) hardware activation permits
(COD permits) stored in the COD
database
show Capacity on Demand (COD)
activation log
Intro(1)
Intro 7