Fujitsu SPARC Enterprise M3000 Xscf Reference Manual page 310

setssh(8)
OPTIONS
296 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised January 2012
Refer to setprivileges(8) for more information.
The following options are supported:
-a
-b bits
-c addpubkey
-c delpubkey
-c {enable|disable} Specifies whether to enable the SSH service. One of the
-c genhostkey
-h
-m dscp=mode
-n
-q
-s line
-u user_name
-y
Deletes all registered user public keys. Should be
specified with "-c delpubkey."
Specifies the size of the RSA host public key to create. For
bits, 1024 or 2048 can be specified. When this option is
omitted, the size is regarded as 1024 bit. XCP 1110 is the
first release to support this option.
Registers the user public key.
Deletes the user public key.
following values can be specified:
Starts the SSH service.
enable
Stops the SSH service.
disable
Generates a host public key.
Displays usage statement. When used with other options
or operands, an error occurs.
Specifies whether or not to permit access from domain to
the SSH service via DSCP. One of the following values can
be specified. It is set to accept by default.
Permits access to the SSH service.
accept
Restricts access to the SSH service.
deny
Automatically answers "n" (no) to all prompts.
Suppresses all messages to stdout, including prompts.
Specifies the user public key number to delete. For line,
specify the number which displayed after the showssh -
c pubkey command executed. Should be specified with
"-c delpubkey."
Specifies the user account name to register or delete the
user public key. Should be specified with "-c
addpubkey" or "-c delpubkey." When the -u option
omitted, the user public key of the current login user
account becomes the target.
Automatically answers "y" (yes) to all prompts.