Fujitsu SPARC Enterprise M3000 Xscf Reference Manual page 112

ioxadm(8)
OPTIONS
98 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised February 2011
The following options are supported:
Forces command execution by ignoring warnings.
-f
Displays usage statement.
-h
When used with other options or operands, an error occurs.
Displays text by page.
-M
Displays only parsable output, suppressing headers in that
-p
output. Fields are separated by single tabs.
Displays verbose output. Refer to specific operands for details.
-v
target Specifies the target device, which can be a card mounted in a
built-in PCI slot in the host system; an External I/O Expansion
Unit; or a field replaceable unit (FRU) in an External I/O
Expansion Unit.
The card in the host slot is identified by the host_path to the card.
host_path is platform dependent and indicates the path to the slot on
the host system that contains the card. The host_path has the following
format:
IOU#0-PCI#0 IO Board 0, PCI-E slot0
The External I/O Expansion Unit (box_id) is identified by serial
number.
Use iox@nnnn, where nnnn represents the last four digits of the box
serial number.
Some commands affect only a single component of an External I/O
Expansion Unit system. For example, individual boats and power
supplies can be turned on and turned off independently.
A FRU in an External I/O Expansion Unit (fru) is identified as:
iox@nnnn/iob0 – I/O boat in the left tray (rear view)
iox@nnnn/iob1 – I/O boat in the right tray (rear view)
iox@nnnn/iob0/link – Uplink card in boat 0
iox@nnnn/iob1/link – Uplink card in boat 1
iox@nnnn/ps0 – Power supply in the left bay (front view)
iox@nnnn/ps1 – Power supply in the right bay (front view)