Addcodactivation - Fujitsu SPARC Enterprise M3000 Xscf Reference Manual

NAME addcodactivation - add a Capacity on Demand (COD) hardware activation key
(COD key) to the COD database
SYNOPSIS addcodactivation key_signature
addcodactivation -h
DESCRIPTION addcodactivation(8) adds the specified COD key to the COD database on the
Service Processor.
This command is not available on the M3000 server.
When the COD key is added, the quantity of headroom is reduced by the quantity
provided by the key. The quantity of headroom cannot be lower than 0.
Note – Before you run this command, you must obtain a COD key. To obtain a
COD key, contact your sales representative. For details on COD keys, refer to the
SPARC Enterprise M4000/M5000/M8000/M9000 Servers Capacity on Demand (COD)
User's Guide.
You must have platadm privileges to run this command.
Privileges
Refer to setprivileges(8) for more information.
The following option is supported:
OPTIONS
-h
OPERANDS The following operand is supported:
key_signature
EXAMPLES
EXAMPLE 1
EXIT STATUS The following exit values are returned:
0
>0
SEE ALSO SPARC Enterprise M4000/M5000/M8000/M9000 Servers Capacity on Demand (COD)
User's Guide
Displays usage statement.
When used with other options or operands, an error occurs.
Specifies the key to be added to the COD database.
Adding a Key
XSCF> addcodactivation \
01:84000000:104:0301010100:3:00000000:xxxxxxxxxxxxxxxxxxxxxx
Successful completion.
An error occurred.

addcodactivation(8)

System Administration 27