Fujitsu SPARC Enterprise M3000 Xscf Reference Manual page 269

For xcp version 1110

Hide thumbs Also See for SPARC Enterprise M3000:

Table of Contents

Specifies the operation to define the IP packet filtering rule.

{add|del|clear}

Any of the following can be specified. This option cannot be

Displays usage statement. When used with other options or

operands, an error occurs.

-i interface

Specifies the XSCF network interface to which you set the IP

packet filtering rules. Any of the following can be set.

• In M3000/M4000/M5000 servers:

For XSCF unit 0:

xscf#0-lan#0

xscf#0-lan#1

For abbreviation:

• In M8000/M9000 servers:

For XSCF unit 0:

xscf#0-lan#0

xscf#0-lan#1

For XSCF unit 1:

xscf#1-lan#0

xscf#1-lan#1

If the -i option is omitted, the default settings are:

• In M4000/M5000 servers:

• In M8000/M9000 servers:

Adds an IP packet filtering rule.

Deletes specified IP packet filtering rule.

Clears all IP packet filtering rules which

have been set.

xscf#0-lan#0, xscf#0-lan#1

xscf#0-lan#0, xscf#0-lan#1,

xscf#1-lan#0, xscf#1-lan#1

setpacketfilters(8)

System Administration