Fujitsu SPARC Enterprise M3000 Product Notes
  1. Manuals
  2. Brands
  3. Fujitsu Manuals
  4. Server
  5. SPARC Enterprise M3000
  6. Product notes
Fujitsu SPARC Enterprise M3000 Product Notes

Fujitsu SPARC Enterprise M3000 Product Notes

Hide thumbs Also See for SPARC Enterprise M3000:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Service Manual, Product Notes
SPARC Enterprise
™
M3000 Server Product Notes
For XCP Version 1093
Manual Code C120-E629-01EN
Part No. 875-4659-10
July 2010, Revision A

Advertisement

Table of Contents
loading

Related Manuals for Fujitsu SPARC Enterprise M3000

Summary of Contents for Fujitsu SPARC Enterprise M3000

  • Page 1 SPARC Enterprise ™ M3000 Server Product Notes For XCP Version 1093 Manual Code C120-E629-01EN Part No. 875-4659-10 July 2010, Revision A...
  • Page 2 INFRINGEMENT, ARE DISCLAIMED, EXCEPT TO THE EXTENT THAT SUCH DISCLAIMERS ARE HELD TO BE LEGALLY INVALID. Unless otherwise expressly set forth in such agreement, to the extent allowed by applicable law, in no event shall Oracle or Fujitsu Limited, and/or any of their affiliates have any liability to any third party under any legal theory for any loss of revenues or profits, loss of use or data, or business interruptions, or for any indirect, special, incidental or consequential damages, even if advised of the possibility of such damages.
  • Page 3 OU À L’ABSENCE DE CONTREFAÇON, SONT EXCLUES, DANS LA MESURE AUTORISÉE PAR LA LOI APPLICABLE. Sauf mention contraire expressément stipulée dans ce contrat, dans la mesure autorisée par la loi applicable, en aucun cas Oracle ou Fujitsu Limited et/ou l’une ou l’autre de leurs sociétés affiliées ne sauraient être tenues responsables envers une quelconque partie tierce, sous quelque théorie juridique que ce soit, de tout manque à...

  • Page 5: Table Of Contents

    Contents Preface vii Technical Support vii Software Resources viii Accessing Documentation viii Fujitsu Welcomes Your Comments ix General Information About XCP 1093 1 Supported Firmware and Software 1 Solaris OS Patch Information 2 Patches for Solaris 10 5/08 2 Patches for Emulex PCI Express (PCIe) Cards 2...
  • Page 6 Solaris OS Issues Fixed in Solaris 10 5/09 27 Solaris Issues Fixed in Solaris 10 10/08 28 Software Documentation Updates 29 Identifying Degraded Memory in a System 31 SPARC Enterprise M3000 Server Product Notes for XCP Version 1093 • July 2010...

  • Page 7: Preface

    XCP version are subsequently updated. You must therefore check the manuals for the latest XCP version in addition to those related to the XCP version you are using. Global Site http://www.fujitsu.com/sparcenterprise/manual/ Japanese Site http://primeserver.fujitsu.com/sparcenterprise/manual/ North American Site https://download.computers.us.fujitsu.com/...

  • Page 8: Software Resources

    SPARC Enterprise M3000 server documentation set. The documentation set is available for download from the following website: Global Site http://www.fujitsu.com/sparcenterprise/manual/ Japanese Site http://primeserver.fujitsu.com/sparcenterprise/manual/ North American Site https://download.computers.us.fujitsu.com/ viii SPARC Enterprise M3000 Server Product Notes for XCP Version 1093 • July 2010...

  • Page 9: Fujitsu Welcomes Your Comments

    Sun Oracle Software (for Oracle Solaris OS, and so on) Related Manuals http://docs.sun.com Fujitsu Welcomes Your Comments If you have any comments or requests regarding this document, or if you find any unclear statements in the document, please state your points specifically on the form at the following URL.
  • Page 10 SPARC Enterprise M3000 Server Product Notes for XCP Version 1093 • July 2010...

  • Page 11: General Information About Xcp 1093

    Solaris 10 5/08 or later, with required patches 2.75GHz XCP 1091 or later Solaris 10 10/08 or later Note – XCP 1080 is the first XCP release for the SPARC Enterprise M3000 server. Note – 8GB DIMM is supported in XCP 1081 or later.

  • Page 12: Solaris Os Patch Information

    Installation information and README files are included in the patch download. Patches for Emulex PCI Express (PCIe) Cards The following Emulex cards require drivers supplied in patch 120222-26: SPARC Enterprise M3000 Server Product Notes for XCP Version 1093 • July 2010...

  • Page 13: Updating To Xcp 1093

    XSEFC402AF Sun StorageTek Enterprise Class 4Gb Dual-Port Fibre Channel PCI- ■ E HBA XSEFC401AF Sun StorageTek Enterprise Class 4Gb Single-Port Fibre Channel ■ PCI-E HBA Updating to XCP 1093 To update your XCP to XCP 1093, refer to the SPARC Enterprise M3000/M4000/M5000/M8000/M9000 Servers XSCF User’s Guide for instructions.

  • Page 14: Notes On Power Consumption Monitoring Function And Airflow Indicator

    You can execute the showntp -l command to refer to the address of the NTP server's own clock source which is set in XSCF and the address of the XSCF's own local clock. SPARC Enterprise M3000 Server Product Notes for XCP Version 1093 • July 2010...
  • Page 15 XSCF> showntp -l remote refid st t when poll reach delay offset jitter ============================================================================== 192.168.1.2 LOCAL(0) 3 u 10 1024 377 0.000 0.000 0.000 *127.127.1.0 .LOCL. 5 l 28 64 377 0.000 0.000 0.008 Of the two NTP server outputs, the upper (192.168.1.2) indicates the NTP server which is set by using the setntp(8) command.

  • Page 16: Notes On Xscf Web

    When you moved the on-screen horizontal frame up or down to change the frame height, do not use the [Monitor Msg Show/Hide] button. To use XSCF Web on the SPARC Enterprise M3000 server which is installed the ■ XCP 1080, disable the cache function of your browser. If you leave the browser cache function enabled, the old cached data might be displayed.

  • Page 17: General Functionality Issues And Limitations

    When you use the XSCF Web under the Internet Explorer 8 or Firefox 3 environment, if a plug-in such as the search tool installed with the browser, disable the pop-up blocking. When you use XSCF Web under the Firefox 3 environment and attempt to log in ■...
  • Page 18 At this time the restoredefaults(8) command is not supported. ■ At this time the -e, -l, -P options of the snapshot(8) command are not ■ supported. SPARC Enterprise M3000 Server Product Notes for XCP Version 1093 • July 2010...

  • Page 19: Information About Hardware

    Notes on DVD Drive and Discs See the "Notes on DVD Drives and Discs in SPARC Enterprise" on the website below before using the CD/DVD discs in the standard DVD drive mounted in this server. URL: http://primeserver.fujitsu.com/sparcenterprise/manual/ Information About Hardware...

  • Page 20: Cd-Rw/Dvd-Rw Drive Unit

    Depending on the USB memory in use, defects such as the XSCF firmware error or reset may occur. In case such defects occurred, stop the use of USB memory immediately. SPARC Enterprise M3000 Server Product Notes for XCP Version 1093 • July 2010...

  • Page 21: Power Control And Operator Panel Mode Switch

    To connect the USB memory to the USB port for XSCF, connect the USB memory directly to the USB port. If connected via USB hub or USB extension cables, it may cause errors. Power Control and Operator Panel Mode Switch You can use the mode switch on the operator panel to switch between system power-on/off when you use the remote power control utilizing the RCI function or the automatic power control system (APCS).

  • Page 22: Hardware Documentation Updates

    Service Manual the identifying the drive unit. See “CD-RW/DVD-RW Drive Unit” on page 10 for detail. SPARC Enterprise M3000 Server Product Notes for XCP Version 1093 • July 2010...

  • Page 23: Updates Of The Sparc Enterprise M3000 Server Site Planning Guide

    Updates of the SPARC Enterprise M3000 Server Site Planning Guide The following information supersedes the information in the SPARC Enterprise M3000 Server Site Planning Guide. Electrical Specifications This section explains the electrical specifications of the M3000 server. Note – The electrical power values in...

  • Page 24: Information About Software

    SPARC Enterprise M3000 Server Product Notes for XCP Version 1093 • July 2010...
  • Page 25 User privileges are either configured on XSCF or learned from a server based on each user's group membership in a network domain. A user can belong to more than one group. User domain is the authentication domain used to authenticate a user. Active Directory authenticates users in the order in which the users' domains are configured.

  • Page 26: Configuring Xscf For Active Directory Support

    (LDAP), Active Directory, or LDAP/SSL for user account data, the user name and UID (if specified) must not already be in use locally or in LDAP, Active Directory, or LDAP/SSL. SPARC Enterprise M3000 Server Product Notes for XCP Version 1093 • July 2010...

  • Page 27: New Proxyuser System Account

    New proxyuser System Account To support Active Directory and LDAP/SSL, this release features a new system account named proxyuser. Verify that no user account of that name already exists. If one does, use the deleteuser(8) command to remove it, then reset XSCF before using the Active Directory or LDAP/SSL feature.

  • Page 28: Xcp Issues Fixed In Xcp 1093

    CPU reset, the following message might be displayed on the console and the domain might hang up. Failed to complete trap processing. mid=0xXX SPARC Enterprise M3000 Server Product Notes for XCP Version 1093 • July 2010...

  • Page 29: Xcp Issues Fixed In Releases Earlier Than Xcp 1093

    XCP Issues Fixed in Releases Earlier Than XCP 1093 lists XCP issues that have been fixed in releases earlier than XCP 1093. TABLE 6 1093 XCP Issues Fixed in Releases Earlier Than XCP TABLE 6 Description Workaround RTIF1- While XSCF is running, a process may go Check that XSCF is started.
  • Page 30 PCI slot. RTIF1- The domain console may display this message: This message can be safely ignored. 090108-001 ipsec_check_inbound_policy: Policy Failure for the incoming packet (not secure) SPARC Enterprise M3000 Server Product Notes for XCP Version 1093 • July 2010...
  • Page 31 1093 XCP Issues Fixed in Releases Earlier Than XCP (Continued) TABLE 6 Description Workaround RTIF1- In the dual power feed system, when the You need to remove and insert the power 090108-002 power failure and the power recovery cable. occurred repeatedly on one line, all domains will be forcibly powered off.
  • Page 32 Once domain detected a failure related to This error log can be safely ignored. 091109-001 DIMM or PCI, the error log about this detected failure is registered every time you reset XSCF. SPARC Enterprise M3000 Server Product Notes for XCP Version 1093 • July 2010...
  • Page 33 1093 XCP Issues Fixed in Releases Earlier Than XCP (Continued) TABLE 6 Description Workaround RTIF1- In XSCF, a host route cannot be set. When you To set a host route, do not specify the netmask 091109-002 use the setroute(8) command and set the (-m option).

  • Page 34: Solaris Os Issues And Workarounds

    300 # svccfg -s volfs setprop start/timeout_seconds=count: 300 svc:/system/filesystem/volfs:defaul t: Method or service exit timed # svcadm refresh dscp out. Killing contract 59. # svcadm refresh volfs SPARC Enterprise M3000 Server Product Notes for XCP Version 1093 • July 2010...
  • Page 35 Solaris OS Issues and Workarounds for All Supported Releases (Continued) TABLE 7 CR ID Description Workaround 6537511 Bluetooth partner is hung during security tests Restart application server. execution. 6660168 If a ubc.piowbeue-cpu error occurs on a If FMA service fails, issue the following domain, the Solaris Fault Management command on the domain to recover: cpumem-diagnosis module might fail, causing...
  • Page 36 This has been fixed in patch 142900-02. not sent through that interface. Problem occurs with M3000/M4000/M5000/M8000/M9000 [Workaround] servers running any Solaris release running Disable probe-based failure detection. IPMP with patch 141444-09 installed. SPARC Enterprise M3000 Server Product Notes for XCP Version 1093 • July 2010...

  • Page 37: Solaris Os Issues Fixed In Solaris 10 10/09

    Solaris OS Issues Fixed in Solaris 10 10/09 lists issues that have been fixed in Solaris 10 10/09 OS. You might encounter TABLE 8 them in supported releases earlier than Solaris 10 10/09. Solaris OS Issues Fixed in Solaris 10 10/09 TABLE 8 CR ID Description...

  • Page 38: Solaris Issues Fixed In Solaris 10 10/08

    Hot-plug of the X4447A-Z, PCI-e Quad-port To avoid the defect, do not install this card. Gigabit Ethernet Adapter UTP card might cause other network devices to fail. SPARC Enterprise M3000 Server Product Notes for XCP Version 1093 • July 2010...

  • Page 39: Software Documentation Updates

    SPARC Enterprise M3000 server software documentation. The corrections for SPARC Enterprise M3000/M4000/M5000/M8000/M9000 Servers XSCF Reference Manual, if not otherwise specified, also apply to the man pages which XSCF provides. These corrections supersede the information on the man pages.
  • Page 40 3. When you update, follow the procedure in "Updating XCP From External Media" or "Updating XCP From the Network" to update XCP, and confirm the version. SPARC Enterprise M3000 Server Product Notes for XCP Version 1093 • July 2010...

  • Page 41: Identifying Degraded Memory In A System

    Identifying Degraded Memory in a System 1. Log in to XSCF. 2. Type the following command: XSCF> showstatus The following example identifies that DIMM number 0A on the Motherboard unit has degraded memory.. XSCF> showstatus MBU_A Status:Normal; MEM#0A Status:Degraded; Information About Software...
  • Page 42 SPARC Enterprise M3000 Server Product Notes for XCP Version 1093 • July 2010...

Table of Contents