OPERANDS
The following operands are supported:
env [-elt] [target [sensors]]
Displays a summary of an External I/O Expansion Unit or link card's
environmental state.
Displays electrical states: measured voltage, current, fan
-e
speed, switch settings.
Displays LED states.
-l
Displays thermal readings.
-t
target
See target in OPTIONS for a general description and the
text below for information specific to env.
sensors
Specifies sensors about which data is to be displayed. If
not specified, information about all sensors is shown.
Cannot be used without target.
ioxadm(8)
System Administration
99