Setpacketfilters - Fujitsu SPARC Enterprise M3000 Xscf Reference Manual

For xcp version 1110

Hide thumbs Also See for SPARC Enterprise M3000:

Table of Contents

setpacketfilters(8)

setpacketfilters - set the IP packet filtering rules to be used in the XSCF network

setpacketfilters [[-q] -{y|n}] -c {add|del} [-i interface] [-s address [/

mask]] -j target

setpacketfilters [[-q] -{y|n}] -c clear

setpacketfilters -h

The setpacketfilters(8) command sets the IP packet filtering rules to be used

in the XSCF network.

IP packet filtering rules can be used to prevent illegal access to the XSCF network.

Settings specified with setpacketfilters(8) are applied immediately after the

command is executed.

You must have platadm or fieldeng privilege to run this command.

Refer to setprivileges(8) for more information.

System Administration