Fujitsu SPARC Enterprise M3000 Xscf Reference Manual page 208

setdomainmode(8)
EXTENDED
DESCRIPTION
194 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised December 2010
(continued) When cpumode is specified for function, one of the following can
be specified for mode:
Note - When the domain is in any status other than powered off, it
results in an error.
auto
compatible
Automatically answers "n" (no) to all prompts.
-n
Suppresses all messages to stdout, including prompts.
-q
Automatically answers "y" (yes) to all prompts.
-y
When the command is executed, a prompt to confirm execution of the command
■
with the specified options is displayed. Enter "y" to execute the command or "n"
to cancel the command.
The system board (XSB) which can be added by Dynamic Reconfiguration (DR)
■
is decided by the CPU operational mode currently set to the domain, which is as
follows:
Domain CPU Value of CPU
configuration Mode
SPARC64 VII+/VII auto
Automatically determines the operational mode of CPU at
domain startup. Depending on the CPU configuration on
the domain, any of the following CPU operational mode is
set:
o Consists only of SPARC64 VII+ or SPARC64 VII
processors: SPARC64 VII enhanced mode
o SPARC64 VII+ or SPARC64 VII processors, and VI
processors mixed: SPARC64 VI compatible mode
o Consists only of SPARC64 VI processors: SPARC64 VI
compatible mode
Regardless of the CPUs mounted, sets the operational mode
of CPU to the SPARC64 VI compatible mode.
Current CPU operational mode
SPARC64 VII enhanced
mode
CPU configuration of a system
board which can be added by
DR operation
SPARC64 VII+/VII