Fujitsu SPARC Enterprise M3000 Xscf Reference Manual page 54

applynetwork(8)
EXIT STATUS
SEE ALSO
40 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised April 2010
Continue? [y|n] :y
Please reset the XSCF by rebootxscf to apply the network settings.
Please confirm that the settings have been applied by executing
showhostname, shownetwork, showroute and shownameserver after rebooting
the XSCF.
The following exit values are returned:
Successful completion.
0
An error occurred.
>0
rebootxscf(8), sethostname(8), setnameserver(8), setnetwork(8), setroute(8)