Cisco Catalyst 2960 Command Reference Manual page 319

Chapter 2 Catalyst 3750 Switch Cisco IOS Commands
cluster enable cluster-name
!
end
Use this configuration? [yes/no]: yes
!
[0] Go to the IOS command prompt without saving this config.
[1] Return back to the setup without saving this config.
[2] Save this configuration to nvram and exit.
Enter your selection [2]:
Related Commands Command
show running-config
show version
OL-8604-03
Description
Displays the running configuration on the switch. For syntax
information, select Cisco IOS Configuration Fundamentals
Command Reference, Release 12.2 > File Management Commands
> Configuration File Management Commands.
Displays version information for the hardware and firmware.
Catalyst 2960 Switch Command Reference
setup
2-395