Debug Platform Ip Dhcp - Cisco Catalyst 2960 Command Reference Manual

debug platform ip dhcp

debug platform ip dhcp
Use the debug platform ip dhcp privileged EXEC command to debug DHCP events. Use the no form
of this command to disable debugging.
Syntax Description all
error
event
packet
rpc
Defaults Debugging is disabled.
Command Modes
Privileged EXEC
Command History Release
12.2(25)FX
Usage Guidelines The undebug platform ip dhcp command is the same as the no debug platform ip dhcp command.
Related Commands Command
show ip dhcp snooping
show ip dhcp snooping
binding
show debugging
Catalyst 2960 Switch Command Reference
B-36
debug platform ip dhcp [all | error | event | packet | rpc]
no debug platform ip dhcp [all | error | event | packet | rpc]
(Optional) Display all DHCP debug messages.
(Optional) Display DHCP error debug messages.
(Optional) Display DHCP event debug messages.
(Optional) Display DHCP packet-related debug messages.
(Optional) Display DHCP remote procedure call (RPC) request debug
messages.
Modification
This command was introduced.
Description
Displays the DHCP snooping configuration.
Displays the DHCP snooping binding information.
Displays information about the types of debugging that are enabled.
Appendix B Catalyst 2960 Switch Debug Commands
OL-8604-03