Chapter 2
Catalyst 2960 Switch Cisco IOS Commands
Examples
This example shows how to configure the default port CoS to 4 on a port:
Switch(config)# interface gigabitethernet0/1
Switch(config-if)# mls qos trust cos
Switch(config-if)# mls qos cos 4
This example shows how to assign all the packets entering a port to the default port CoS value of 4
on a port:
Switch(config)# interface gigabitethernet0/1
Switch(config-if)# mls qos cos 4
Switch(config-if)# mls qos cos override
You can verify your settings by entering the show mls qos interface privileged EXEC command.
Related Commands
Command
show mls qos interface
OL-8604-03
Description
Displays quality of service (QoS) information.
Catalyst 2960 Switch Command Reference
mls qos cos
2-211