Cisco Catalyst 2960 Command Reference Manual page 205

Chapter 2 Catalyst 2960 Switch Cisco IOS Commands
Examples This example shows how to apply a MAC extended ACL named macacl2 to an interface:
Switch(config)# interface gigabitethernet0/1
Switch(config-if)# mac access-group macacl2 in
You can verify your settings by entering the show mac access-group privileged EXEC command. You
can see configured ACLs on the switch by entering the show access-lists privileged EXEC command.
Related Commands Command
show access-lists
show link state group
show running-config
OL-8604-03
Description
Displays the ACLs configured on the switch.
Displays the MAC ACLs configured on the switch.
Displays the running configuration on the switch. For syntax
information, select Cisco IOS Configuration Fundamentals Command
Reference, Release 12.2 > File Management Commands >
Configuration File Management Commands.
Catalyst 2960 Switch Command Reference
mac access-group
2-179