Debug Platform Udld - Cisco Catalyst 2960 Command Reference Manual

Appendix B Catalyst 2960 Switch Debug Commands

debug platform udld

Use the debug platform udld privileged EXEC command to enable debugging of the
platform-dependent UniDirectional Link Detection (UDLD) software. Use the no form of this command
to disable debugging.
Syntax Description all
error
rpc {events | messages}
Defaults Debugging is disabled.
Command Modes Privileged EXEC
Command History Release
12.2(25)FX
Usage Guidelines
The undebug platform udld command is the same as the no debug platform udld command.
Related Commands Command
show debugging
OL-8604-03
debug platform udld [all | error | rpc {events | messages}]
no debug platform udld [all | error | rpc {events | messages}]
(Optional) Display all UDLD debug messages.
(Optional) Display error condition debug messages.
(Optional) Display UDLD remote procedure call (RPC) debug messages.
The keywords have these meanings:
Modification
This command was introduced.
Description
Displays information about the types of debugging that are enabled.
• events—Display UDLD RPC events.
• messages—Display UDLD RPC messages.
Catalyst 2960 Switch Command Reference
debug platform udld
B-57