Cisco Catalyst 2960 Command Reference Manual page 379

Hide thumbs Also See for Catalyst 2960:
Table of Contents

Advertisement

Chapter 2 Catalyst 3750 Switch Cisco IOS Commands
Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0
Queueing strategy: fifo
Output queue :0/40 (size/max)
5 minute input rate 0 bits/sec, 0 packets/sec
5 minute output rate 0 bits/sec, 0 packets/sec
This is an example of output from the show interfaces accounting command.
Switch# show interfaces accounting
Vlan1
Interface Vlan2 is disabled
Vlan7
No traffic sent or received on this interface.
Vlan31
No traffic sent or received on this interface.
GigabitEthernet0/1
No traffic sent or received on this interface.
GigabitEthernet0/2
No traffic sent or received on this interface.
<output truncated>
OL-8604-03
2 packets input, 1040 bytes, 0 no buffer
Received 0 broadcasts, 0 runts, 0 giants, 0 throttles
0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored
0 watchdog, 0 multicast, 0 pause input
0 input packets with dribble condition detected
4 packets output, 1040 bytes, 0 underruns
0 output errors, 0 collisions, 3 interface resets
0 babbles, 0 late collision, 0 deferred
0 lost carrier, 0 no carrier, 0 PAUSE output
0 output buffer failures, 0 output buffers swapped out
Protocol
IP
Spanning Tree
ARP
Protocol
Protocol
Protocol
Protocol
Pkts In
Chars In
Pkts Out
1094395
131900022
283896
17033760
63738
3825680
Pkts In
Chars In
Pkts Out
Pkts In
Chars In
Pkts Out
Pkts In
Chars In
Pkts Out
Pkts In
Chars In
Pkts Out
Catalyst 2960 Switch Command Reference
Chars Out
559555
84077157
42
2520
231
13860
Chars Out
Chars Out
Chars Out
Chars Out
show interfaces
2-455

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents