Cisco Catalyst 2960 Command Reference Manual page 382

Hide thumbs Also See for Catalyst 2960:
Table of Contents

Advertisement

show interfaces
Appliance trust: none
Table 2-22
Field
Name
Switchport
Administrative Mode
Operational Mode
Administrative Trunking
Encapsulation
Operational Trunking Encapsulation
Negotiation of Trunking
Access Mode VLAN
Trunking Native Mode VLAN
Trunking VLANs Enabled
Trunking VLANs Active
Pruning VLANs Enabled
Protected
Unknown unicast blocked
Unknown multicast blocked
Voice VLAN
Appliance trust
This is an example of output from the show interfaces switchport backup command:
Switch# show interfaces switchport backup
Switch Backup Interface Pairs:
This is an example of out put from the show interfaces switchport backup command when a Flex Link
interface goes down (LINK_DOWN), and VLANs preferred on this interface are moved to the peer
interface of the Flex Link pair. In this example, if interface Gi2/0/6 goes down, Gi2/0/8 carries all
VLANs of the Flex Link pair.
Switch#show interfaces switchport backup
Switch Backup Interface Pairs:
Active Interface
------------------------------------------------------------------------
GigabitEthernet2/0/6
Catalyst 2960 Switch Command Reference
2-458
show interfaces switchport Field Descriptions
Active Interface
Backup Interface
--------------------------------------------------------------
Fa0/1
Fa0/2
Fa0/3
Fa0/5
Po1
Po2
Backup Interface
GigabitEthernet2/0/8
Chapter 2 Catalyst 3750 Switch Cisco IOS Commands
Description
Displays the port name.
Displays the administrative and operational status of the port.
In this display, the port is in switchport mode.
Displays the administrative and operational modes.
Displays the administrative and operational encapsulation
method and whether trunking negotiation is enabled.
Displays the VLAN ID to which the port is configured.
Lists the VLAN ID of the trunk that is in native mode. Lists the
allowed VLANs on the trunk. Lists the active VLANs on the
trunk.
Lists the VLANs that are pruning-eligible.
Displays whether or not protected port is enabled (True) or
disabled (False) on the interface.
Displays whether or not unknown multicast and unknown
unicast traffic is blocked on the interface.
Displays the VLAN ID on which voice VLAN is enabled.
Displays the class of service (CoS) setting of the data packets
of the IP phone.
State
Active Up/Backup Standby
Active Down/Backup Up
Active Standby/Backup Up
State
Active Down/Backup Up
OL-8604-03

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents