Debug Sw-Vlan Notification - Cisco Catalyst 2960 Command Reference Manual

Appendix B Catalyst 2960 Switch Debug Commands

debug sw-vlan notification

Use the debug sw-vlan notification privileged EXEC command to enable debugging of the activation
and deactivation of Inter-Link Switch (ISL) VLAN IDs. Use the no form of this command to disable
debugging.
Syntax Description
accfwdchange
allowedvlancfgchange
fwdchange
linkchange
modechange
pruningcfgchange
statechange
Defaults
Debugging is disabled.
Command Modes Privileged EXEC
Command History Release
12.2(25)FX
Usage Guidelines The undebug sw-vlan notification command is the same as the no debug sw-vlan notification
command.
Related Commands Command
show debugging
show vlan
OL-8604-03
debug sw-vlan notification {accfwdchange | allowedvlancfgchange | fwdchange | linkchange |
modechange | pruningcfgchange | statechange}
no debug sw-vlan notification {accfwdchange | allowedvlancfgchange | fwdchange |
linkchange | modechange | pruningcfgchange | statechange}
Display debug messages for VLAN manager notification of aggregated
access interface spanning-tree forward changes.
Display debug messages for VLAN manager notification of changes to the
allowed VLAN configuration.
Display debug messages for VLAN manager notification of spanning-tree
forwarding changes.
Display debug messages for VLAN manager notification of interface
link-state changes.
Display debug messages for VLAN manager notification of interface mode
changes.
Display debug messages for VLAN manager notification of changes to the
pruning configuration.
Display debug messages for VLAN manager notification of interface state
changes.
Modification
This command was introduced.
Description
Displays information about the types of debugging that are enabled.
Displays the parameters for all configured VLANs or one VLAN (if the
VLAN name or ID is specified) in the administrative domain.
debug sw-vlan notification
Catalyst 2960 Switch Command Reference
B-77