Cisco Catalyst 2960 Command Reference Manual page 436

show mac address-table static
Examples This is an example of output from the show mac address-table static command:
Switch> show mac address-table static
------------------------------------------
Vlan
----
All
All
All
All
All
All
4
6
Total Mac Addresses for this criterion: 8
Related Commands Command
mac address-table static
mac address-table static drop
show mac address-table address
show mac address-table aging-time
show mac address-table count
show mac address-table dynamic
show mac address-table interface
show mac address-table notification
show mac address-table vlan
Catalyst 2960 Switch Command Reference
2-512
Mac Address Table
Mac Address Type
----------- ----
0100.0ccc.cccc STATIC
0180.c200.0000 STATIC
0100.0ccc.cccd STATIC
0180.c200.0001 STATIC
0180.c200.0004 STATIC
0180.c200.0005 STATIC
0001.0002.0004 STATIC
0001.0002.0007 STATIC
Chapter 2 Catalyst 3750 Switch Cisco IOS Commands
Ports
-----
CPU
CPU
CPU
CPU
CPU
CPU
Drop
Drop
Description
Adds static addresses to the MAC address table.
Enables unicast MAC address filtering and configures the
switch to drop traffic with a specific source or destination
MAC address.
Displays MAC address table information for the specified
MAC address.
Displays the aging time in all VLANs or the specified
VLAN.
Displays the number of addresses present in all VLANs or
the specified VLAN.
Displays dynamic MAC address table entries only.
Displays the MAC address table information for the
specified interface.
Displays the MAC address notification settings for all
interfaces or the specified interface.
Displays the MAC address table information for the
specified VLAN.
OL-8604-03