Show Tcam Pbr - Cisco Catalyst 3550 Command Reference Manual

Chapter 2 Catalyst 3550 Switch Cisco IOS Commands

show tcam pbr

Use the show tcam pbr user EXEC command to display the policy-based routing (PBR) region of the
specified ternary content addressable memory (TCAM). Use the keywords to display information for a
specific TCAM ID or specific characteristics.
Syntax Description
tcam-id
entries [entry-id]
port-labels [label-id]
vlan-labels [label-id]
masks [mask-id]
size
statistics [entries | hits |
labels | masks]
| begin
| exclude
| include
expression
Command Modes User EXEC
Command History Release
12.1(13)EA1
Usage Guidelines Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
do not appear, but the lines that contain Output appear.
OL-8566-01
show tcam pbr tcam-id {{entries [entry-id]} | {port-labels [label-id]} | {vlan-labels [label-id]} |
{masks [mask-id]} | size | {statistics [entries | hits | labels | masks]}} [ | {begin | exclude |
include} expression]
Identify the TCAM ID for displaying PBR TCAM information.
Display one or all TCAM PBR entries and associated information. When all
entries appear, the mask information also appears. This display output is a
raw hex dump of information intended for a Cisco technical support
representative. The range is 0 to 65535.
Display entries and associated information for a port label.
Note
Display entries and associated information for a PBR VLAN label. This
display output is a raw hex dump of information intended for a Cisco
technical support representative. The range is 0 to 255.
Display mask information. This display output is a raw hex dump of
information intended for a Cisco technical support representative. The
range is 0 to 65535.
Display the size of the PBR TCAM region.
Display allocation statistics for the PBR TCAM region, including allocated
and available masks and entries.
(Optional) Display allocation statistics for entries, hits, labels, or masks.
The labels keyword returns a total count of all labels present in TCAM.
(Optional) Display begins with the line that matches the expression.
(Optional) Display excludes lines that match the expression.
(Optional) Display includes lines that match the specified expression.
Expression in the output to use as a reference point.
Modification
This command was introduced.
Though visible in the command-line help string, the port-labels
keyword is not supported for PBR.
Catalyst 3550 Multilayer Switch Command Reference
show tcam pbr
2-483