Debug Span-Session - Cisco Catalyst 3550 Command Reference Manual

Appendix B Catalyst 3550 Switch Debug Commands

debug span-session

Use the debug span-session privileged EXEC command to enable debugging of events occurring in the
platform-specific software that implements the Switched Port Analyzer (SPAN) feature. Use the no form
of this command to disable debugging.
Syntax Description
This command has no arguments or keywords.
Defaults
Debugging is disabled.
Command Modes Privileged EXEC
Command History Release
12.1(6)EA1
Usage Guidelines
The undebug span-session command is the same as the no debug span-session command.
Related Commands Command
show debugging
show monitor
OL-8566-02
debug span-session
no debug span-session
Modification
This command was introduced.
Description
Displays information about the types of debugging that are enabled. For
syntax information, select Cisco IOS Release 12.2 Configuration Guides
and Command References > Cisco IOS Configuration Fundamentals
Configuration Guide, Release 12.2 > System Management >
Troubleshooting and Fault Management.
Displays SPAN session information.
Catalyst 3550 Multilayer Switch Command Reference
debug span-session
B-35